Home

Training Program 2015

Courses by Welding Inspector and NDT Inspector


Magnetic Particle Testing Courses Level 2 (20 Hrs)

Training Program : Date 31st  January, date 1st February 2015
                              : Date 25th-26th April 2015
                              : Date 11st -12nd July 2015
                              : Date 21st - 22nd November 2015

These magnetic particle testing courses are services companies, organizations, who require their personnel to be trained in Magnetic Particle Testing, processing or service discontinuities in ferrous materials. In covering the theoretical aspects of this method, this level I course provides demonstrations and practical hands-on laboratory time on both portable the equipment. Level I & II personnel. In accordance with training requirements specified by other documents such as SNT-TC-1A/CP-189

Liquid Penetrant Testing Courses Level 2(20 Hrs)

Training Program: : Date 17th-18th January   2015
                               : Date 18th-19th April 2015
                               : Date 4th-5th July 2015
                               : Date 14th-15th November 201

These liquid penetrant testing courses are designed for manufacturers, services companies, who require their personnel to be trained in Liquid Penetrant Testing, used to locate inherent, processing or service discontinuities in materials. In covering the theoretical aspects of this method, the course provides demonstrations and practical hands-on laboratory time on both portable the equipment. This course is designed to comply with the  training requirements satisfies the training hours needed for both Level I and II certification in accordance with SNT-TC-1A/CP-189

Radiographic Testing Courses Level 2 (40 Hrs)

Training Program   : Date 7th, 8th, 14th, 15th February 2015
                                : Date 9th, 10th, 16th, 17th June 2015
                                : Date 22nd, 23th, 29th, 30th August 2015
                                : Date 12nd, 13th, 19th, 20th December 2015

These radiographic testing courses are designed for manufacturers, services who require their technicians to be trained in the application of radiographic techniques.
This level I course covers both X and Gamma Radiography with an approximately equal balance of theory and practical sessions. As well as working through their own supervised practical exercises will receive full instruction on darkroom procedures and radiographic interpretation.
The level II course builds upon the Level I syllabus and emphasizes a greater depth of study, development of procedures and techniques. The course satisfies the training hours needed for Level I/II certification in accordance with SNT-TC-1A/CP-189


Ultrasonic Testing Courses Level 2(40 Hrs)

Training Program

Ultrasonic level I a comprehensive course for persons with little or no background in ultrasonic testing although introductory, this program coverage of ultrasonic theory and instrument operation. Our own training manual, including detailed laboratory exercises, enables clear understanding of technical principles and test procedure proper recording of test results, evaluation, introduction to angle beam and immersion testing.

Ultrasonic testing level II an advanced, laboratory course for developing practical skills the course is applications weld inspection, inspection, and immersion techniques. Angle beam testing and defect evaluations are covered in detail. The course satisfies the training hours needed for Level I/ II certification in accordance with SNT-TC-1A/CP-189



Visual Testing Course

Training Program : Date 28th, 29th, March and 4th, 5th February 2015
                              : Date 213th, 14th, 20th, 21st June 2015
                              : Date 10th, 11st 17th, 18th October 2015

This course is designed to meet the industrial qualification requirement for visual examination. The training cover basic theory and test principles products, equipment operation include safety, operation procedure, applicable techniques, specification and written instruction, interpretation of indications as well training the course satisfies the training hours in accordance with SNT-TC-1A/CP-189



 

 

CSWIP 3.0


Visual Welding Inspector (CSWIP 3.0)


24th -26th January 2015
21st -23rd March 2015
23rd -25th May 2015
25th -27th July 2015
3rd -5th     October 2015
5th -7th     December 2015

 

CSWIP 3.1


Welding Inspector (CSWIP 3.1)


20th -24th February 2015
11st -15th April 2015
5th -9th June 2015
7th -11st August 2015
6th -10th November 2015

 

 

*Note

Welding Inspector CSWIP 3.0 and 3.1

Location Banchang Rayong ( Thailand)
Contact Khun Yaovarak Tel:0800957585  (e-mail: cnipacific@yahoo.com)
Contact Khun Wanalee Tel: 038222136-7  (e-mail: wanalee@twi-thailand.com)


www.twitraining.com         www.tisthailand.org                            
www.cswip.com